Blog / Articles

Renovate Your Old Concrete Driveway Yourself-Here’s How


how to melt ice fast on driveway

If you live in an old home, the best way to upgrade your property is by renovating the driveway. If your driveway has cracks and holes, it’s time for a new one. You don’t have to hire a contractor to do this project yourself: with a little preparation and know-how, you can build a great-looking concrete driveway in no time at all! Just follow along with these simple steps for repairing concrete driveway cracks. We will also discuss how to melt ice fast on driveway.

Safe Thaw - Ice And Snow Management Solution

Before getting started it’s important to know how to take care of your driveway so it last longer. 

How To Melt Ice Fast On Driveway

When it comes to preventing cracks, there are plenty of products available that you can use to help keep your driveway from cracking further. Safe Thaw is a popular choice for this job. It is a natural ice melt and comprises modified carbonyl diamide crystals and special glycols that leach out a bluish liquid from the core when they contact the icy surface. It is 100% environment-friendly and does not leave any negative imprint on the environment. It is important to read the instructions to check how much ice melt for the driveway is required.

Clean The Old Driveway

The first step in the process of building a new concrete driveway is to clean the old one. Use your pressure washer and look for loose debris. If you see any, use a shovel or broom to pick it up and dispose of them properly.

Patch Up Any Holes

Patching a hole in your concrete driveway or parking lot should be done as soon after the incident as possible so that water does not seep into the gravel underneath and weaken it further. The longer you wait before repairing your concrete driveways or parking lots, the more difficult and expensive it will be later on when trying to fix them.

Mixing, Pouring, And Finishing The Concrete For Your Driveway


Concrete is a science, so it’s important to get the mix right. You can either hire a concrete contractor or do it yourself with the help of a wheelbarrow or cement mixer.


Once you’ve mixed your concrete, use a level to ensure that the surface is flat before pouring in the wet mixture (you’ll need to use at least 40 mm of water). Use a trowel to smooth out any bumps that may have formed during mixing, then wait for it all to dry before watering down any drier areas on top with water spray bottles (this will help prevent cracking).


Sealing your concrete driveway is a good idea, but it’s not necessary. Sealing will help prevent stains, cracks, weeds, and moss from ruining your driveway. You should also consider sealing if you live in an area that gets a lot of rain or snow during the winter months.

100% salt & chloride-free, fast acting Ice Management Solution


In the end, it’s important to remember that no matter how much experience you have with concrete, or how simple the project may seem, it’s always better to err on the side of caution. It’s never a bad idea to take your time and do things right instead of rushing ahead and making mistakes that could cost you more in the long run. Don’t forget to take care of your driveway this time. With this article, you no longer need to worry about -how to melt ice fast on driveway.

Try Also Our Other Winter Safety Products:

Safe Paw

The Original and #1 Selling Pet and Child Safe Ice Melt for over 20 years. Guaranteed environmentally safe –It won’t harm animals or children, and it won’t damage your property. That’s Safe Paw.  Safe Paw can change how winter affects our planet.

Safe Paw Ice Melt - 8 Lb Jug

Walk On Ice

The handy disposable canister can be taken everywhere, with the same 100% naturally occurring minerals that provide instant traction on ice or snow. Use it on sidewalks, steps, or as an instant traction agent for your car.

Walk On Ice - Traction Agent
Buy Now On Amazon